Evans Engineering Steels itself for further expansion
GARETH Evans has hailed the impact that becoming an official Steelwrist sales and service partner for Scotland has had on his business.
Dunbar-based Evans Engineering...
Hydraulic pile croppers set to generate attention at ScotPlant 2024
CONTINUING growth, the opening of a dedicated Scottish office, expansion internationally, and the increasing use of its pile croppers on major infrastructure and housing...
Getting to know…Gordon Cameron
Gordon Cameron has been involved in the plant industry for many years now, working his way up to become managing director of Hardox Wearparts...
Miller time: £1.5m investment boosts production
MILLER has announced an investment of almost £1.5 million in overhauling its UK manufacturing plant.
The attachments specialist says the "substantial investment" focuses on three key...
Sandvik and Steelwrist confirm cooperation agreement
SANDVIK and Steelwrist have announced a cooperation for full automatic work tool adaptors for Rammer hydraulic hammers.
As demand for fully automatic coupler systems increases,...
Miller UK to celebrate the big 40 at ScotPlant
MILLER UK plans to celebrate "40 years of innovation" at ScotPlant 2018.
The earthmoving attachments manufacturer revealed visitors to the exhibition will get to witness...
New engcon finger grab takes handling to ‘whole new level’
ENGCON is launching a new 'lightweight and agile' finger grab said to take the handling and lifting of twigs, branches and logs to a...
Worsley Plant set for fresh chapter following acquisition
WORSLEY Plant has been acquired by the firm's operations director, Adrian Nixon.
Adrian’s journey began as an agricultural engineer, where he developed a passion for...
Historic hammer gifted to Finning UK and Ireland
AN 'iconic' Cat H180 hydraulic hammer located at the Caterpillar facility in Den Bosch for the past 25 years has been moved to its...
Astrak aims to expand 20-tonne bucket range into 2026
ASTRAK has revealed plans to continue expanding its GeoXD range of buckets into 2026.
The Kirkcaldy-based business has been supplying the UK plant and construction...
Hill Engineering appoints new head of commercial
HILL Engineering has appointed Alex Holmes, a former McLaren global network development manager, as head of commercial.
He joins the County Down-based business after eight...
Highland Hammer Hire confirms changes to Rototilt dealership
HIGHLAND Hammer Hire (HHH) has announced the business will no longer be supplying Rototilt in Scotland.
The company, which has been a distributor of the...
Cameron to leave Hardox Wearparts Stirling MD role
GORDON Cameron has resigned from his role as managing director at Hardox Wearparts Stirling.
Owners SSAB said they had accepted his resignation "with regret", adding...
Engcon to triple production capacity with multi-million pound investment
ENGCON has announced plans to triple production capabilities with an investment exceeding £7.5 million.
The manufacturer said the investment programme is part of its commitment to...
Rototilt Control expanded to RC3 tiltrotator
ROTOTILT Control is being expanded to fit even more excavators, the attachments specialist has announced.
Rototilt Control was launched last year with RC System, RC...
Engcon improves profitability despite pandemic-related challenges
ENGCON increased profit margin by over 3.5% in 2020 despite the pandemic-related challenges.
The tiltrotator manufacturer reported a 'marginal' reduction in net sales (from approximately...
Connecticut event marks milestone for Steelwrist’s North American expansion plans
TILTROTATOR manufacturer Steelwrist has inaugurated its new North American HQ at an event in Newington, Connecticut.
The event was attended by US senator Richard Blumenthal,...
Rototilt celebrates double design award success for new joysticks
ROTOTILT is celebrating double award joy after winning both the Red Dot Award and the iF Design Award 2023 for its RC Joysticks.
The attachments...
Steelwrist hails ‘tremendous journey so far’ as firm marks 20 years
STEELWRIST customers, partners and employees recently gathered at the firm's HQ in Rosersberg, Sweden, to mark the manufacturer's 20th anniversary.
The event included a factory...
Steelwrist showcases new X02 tiltrotator at bauma
STEELWRIST is showcasing its new X02 tiltrotator - designed for excavators below 2.5 tonnes - at bauma 2022.
The manufacturer said the installation ratio for...
Steelwrist unveils third generation tiltrotators at Hamburg event
STEELWRIST launched its third generation of tiltrotators at a special event at the manufacturer's new facility in Hamburg.
A new product category was also introduced as...
School of hard NOX
Kinshofer UK recently held two open days to educate potential users on the benefits of the NOX tilitrotators. Andrew Little, Kinshofer UK national sales...
Steelwrist retains status as one of Sweden’s best run firms
ATTACHMENTS specialist Steelwrist has been recognised as one of Sweden's best managed companies for the second year in a row.
Best Managed Companies is a...
British bucket innovation showcased at bauma
HSM joined its ITR partners from around the world at bauma 2022 to showcase innovations in designing and manufacturing buckets and attachments.
The business described...
Getting to know…David Marshall
David Marshall was appointed Worsley Plant’s area sales manager for Scotland after impressing MD Sean Heron when he worked on the attachment specialist’s stand...
Rototilt to launch ‘state-of-the-art’ robotic welding facility
TILTROTATOR specialist Rototilt has announced it is investing in the future by expanding its factory in Vindeln, Sweden.
The plans includes the development of a...
Attachments manufacturer commits to Science Based Targets initiative
ENGCON is joining the Science Based Targets initiative (SBTi) as part of the attachment specialist's sustainability journey.
With science-based emission targets, engcon is now one...
Deep collaboration can encourage greater tiltrotator adoption in the UK
James Venerus, general manager product marketing at Komatsu Europe, discusses how Original Equipment Manufacturers (OEMs) can accelerate tiltrotator adoption through deeper collaboration with manufacturers...
Attachments specialist appoints new aftersales manager
WORSLEY Plant has appointed Callum Poole to the newly created role of aftersales manager.
The attachments business revealed that Callum arrives with a wealth of...
Rammer Hammer the “obvious choice” for hire firm
A Cheshire hire firm recently took delivery of the new 7-tonne Rammer Hammer breaker, thanks to Murray Plant.
The Paisley-based dealer, which was acquired by...
