NEW research has found that the amount of construction aggregates from recycled and secondary sources in Britain has reached an all-time high, as producers invest in more advanced ways to turn ‘waste’ into valuable materials.
This was one of the key findings of a new report from the Mineral Products Association (MPA), showing the total volume of recycled and secondary materials reached 73.5 million tonnes in 2022. The data confirms recycling rates in Britain are higher than any other major European economy.
In the report ‘Construction Aggregates Supply in Great Britain: Primary, Recycled and Secondary Aggregates in 2022’ the MPA demonstrates that non-primary materials accounted for over 30% of the country’s total demand for aggregates.
Breaking the figures down further, the report revealed that 60.3 million tonnes of recycled aggregates came from the recovery of construction, demolition and excavation wastes (CDEW) such as concrete and brick rubble, old rail track ballast, and earthworks spoil. It also shows 5.8 million tonnes of asphalt planings were processed for reuse in roads.
The increasingly important role played by industrial by-products like china clay waste and incinerator bottom ash (IBA) to make secondary aggregates is also highlighted, with 7.4 million tonnes of these materials produced in 2022.
However, the report also highlights the challenges in accurately tracking progress due to the absence of comprehensive national statistics. The MPA revealed it is leading industry efforts to address these data gaps to better inform evidence-based policymaking. The proposed introduction of a mandatory UK-wide digital waste tracking system in 2025 should also help enhance the availability and quality of data.
Despite the record recycling figures, the report demonstrated the significance of primary aggregates, which still make up 70% of the country’s aggregate demand. The MPA added that it has long flagged concerns about the shortcomings of a planning and permitting system which means replenishment rates for these materials is at an all-time low.
Mark Russell, the MPA’s executive director for planning & mineral resources, said, “Whilst the construction industry may well be the country’s largest source of waste, MPA members have become proficient in recovering materials arising from build development and processing them so they can be put back to good use elsewhere in construction. The most efficient way to process and reuse these materials is close to where they are sourced to minimise transport, and the bureaucracy of the planning and permitting system is often a barrier to delivering the most efficient solutions.
“That said, there are major investments taking place to improve the quality and availability of recycled and secondary materials, giving developers and contractors the confidence to specify them. Even the small amount of soft inert waste that cannot be turned into aggregate is put to good use in quarry restoration and land remediation. Nothing is wasted!”
Author of the report Aurelie Delannoy, director of economic affairs at MPA, added, “The substantial contribution of recycled and secondary aggregates to total supply is a huge but largely hidden success story for the industry. Aggregates producers have been recycling suitable construction and demolition waste for years to meet our construction needs as efficiently and sustainably as possible, whilst meeting stringent technical standards.
“As we look ahead, further progress in recycling can be anticipated, supported by the major investments that have recently taken place in the extractive sector. However, it is important to recognise that the availability of recycled aggregates is inherently tied to demolition activity and the availability of suitable waste materials. With increasing demands to achieve climate neutrality by 2050 and address key infrastructure and housing needs, primary aggregates extraction will remain essential for meeting the majority of demand over the long term.”